GRID Symposium 2006
Dragoljub Novaković, Igor Karlović, Živko Pavlović, Čedomir Pešterac
MODERN TRENDS DEVELOPMENT IN GRAPHIC TECHNOLOGY
Abstract:
Modern trends of development in graphic technology are always been in a focus interesting for
they whether them and they who are advantage it. Condition and trends should be factor to decide
and destination to development. In this paper is attempt to present and to give deliver response on
to challenge this moment and future.
Keywords:
development, graphic technology
Diana Gregor-Svetec
VISCOELASTIC PROPERTIES OF COATED BOARDS
Abstract:
For determination of viscoelastic properties of polymer materials different methods could be used.One of the possibilities to obtain some information about viscoelastic behaviour of papers and boards is study of stress strain curve. This was also the main aspect of our investigation, determination of viscoelastic properties of boards from the measured load versus elongation curve. In our study two kinds of boards were analysed, differing in top layer structure. The tensile properties of boards were determined with an Instron 5567 tensile testing machine. From the continuous record of load versus elongation, a stress versus strain curve was obtained and further evaluated by a special method, called DINARA. With the numerical analyse the following data were obtained: tensile strength, stretch at break, tensile energy absorption, yield stress, yield strain and yield modulus. The data obtained from the tensile test for different boards were compared and the influence of board basic properties on its viscoelstic properties was determined.
Keywords:
coated board, viscoelastic properties, stress-strain curve
Tome Jolevski, Roberto Pasić, Silvana Angelevska, Ilija Jolevski
CONDUCTIVITY, PH AND VISCOSITY, MEASURE CONSIDERABLE OF THIS DIMENSION AND THEIR ASCENDANCY IN OFFSET PRINTING PROCESS
Abstract:
Conductivity and pH of fountain solution and viscosity of ink for offset printing are dimension
which directly ascendancy to quality and economy in printing processes. Are they the marginalized
dimension, considering that printing houses in south part of Macedonia, where are researches is
done, are not measuring this dimension in the printing process.
Keywords:
conductivity, pH, viscosity.
Roberto Pasić, Silvana Angelevska, Ilija Jolevski
AUTOMATISATION OF GRAPHIC INDUSTRY WITH IMPLEMENTATION OF CIP4
Abstract:
Standardization and automatisation in graphic productions, starting from DRUPA 2004, is directly
connected with cooperation CIP4 and her job schema JDF, completely based on XML (eXtensible
Markup Language).
Keywords:
CIP4, JDF, XML.
Rozália Szentgyörgyvölgyi
PROCESS AND WORKFLOW MANAGEMENT IN GRAPHIC ARTS INDUSTRY
Abstract:
Workflow systems are becoming applied in a wide range to improve productivity and quality control.Digital workflow systems developed by market leading companies meet this novel demand.These systems integrate jobs and forward them to the units addressed. Implementing these systems improve the market status of printing companies. Many routine and calculation tasks can be automated, administrative work can be simplified. In addition information flow becomes faster between units, workflow systems also enhance customer loyalty. All these advantages and opportunities make these systems an actuality to discuss.
The objective of the research work is to draw attention to the process design solutions applied in
print industry, to introduce and analyze digital workflow systems and to provide information on
relevant standards and operational background. Furthermore digital workflow systems are compared to traditional production management solutions.
Keywords:
workflow, CIM, process integration
Svitlana Havenko, Raya Rybka
CONTROL QUALITY AND OPTIMIZATION OF PRINT PRODUCTION QUALIMETRIC INDEXES
Abstract:
The quality of design of printed editions has been investigated through testing. The properties
characterizing their qualimetric indexes have been defined in this article.
Keywords:
quality, optimization, qualimetric value
Branko Savić, Nenad Stanković
ETERMINING OPTIMAL INTERVAL OF TEHNICAL DIAGNOSTICS ON PRINTING PRESS
Abstract:
In the literature there is a certain number of models for technical diagnostics, that is the models
used to determine the optimal moment to examine the condition of the system or its part. After the examination of those models and their systematization, an original model has been made. The intention in the paper is to make a model that will be complex in the sense of relating maintenance expenses, condition parameters of the system and reliability elements of the system therefore, the aim of the paper is to create such a model that will take into account several factors for determining optimal moment for technical diagnostics, so that it can be usuable in practice. The model would be used in most technical system, but here in an example of its realization and usage in printing presses is given.
Keywords:
technical diagnostics, conditional based maintenance, printing press
Roberto Pasić, Silvana Angelevska, Ilija Jolevski
OPEN AND CLOSED LOOP SYSTEMS AND THEIR APPLICATION IN PRINTING PROCESSES
Abstract:
Automatisation of printing processes and control of colors and registers is a trend who existing a
long time. Application of Open and Closed Loop Systems in printing processes is great and there’s no exist a direction system who didn’t use Loop system.
Keywords:
open loop system, closed loop system
Zorić Vladimir, Dragoljub Novaković, Igor Karlović, Živko Pavlović
AUTOMATIZATION OF PRINTING PROCESS
Abstract:
U radu je predstavljen automatizovan digitalni radni tok i pregled uslova koje je neophodno zadovoljiti da bi takav proces mogao da funkcioniše u realnim proizvodnim okolnostima. Akcenat je dat na PPF i JDF formate, prikaz njihove osnovne strukture i prednosti koje donose u proizvodni proces. Dat je pregle uslova koje je neophodno zadovoljiti u pripremi, štampi i završnoj grafičkoj obradi da bi ovakav sistem mogao u potpunosti da se iskoristi.
Keywords:
digitalni radni proces, kontrola, uslovi
Biljana Gemović
IMPLEMENTATION OF INTEGRATED MANAGEMENT SYSTEM IN A GRAPHIC INDUSTRY ENTERPRISE
Abstract:
The paper presents the approach to implementation of quality management systems ISO 9001 and
OHSAS 18001 (health and safety) as a unique management system in a graphic industry enterprise.
Keywords:
integrated management system, ISO 9001, OHSAS 18001
Klementina Možina
FITTING THE DIACRITIC MARKS
Abstract:
The invention of printing and movable type made possible special marks (diacritics), these marks
became commonplace. Since then, diacritics have posed a special challenge for type designers.
The design of diacritics, their size and spacing can be very important for the reader but can also
cause many problems, particularly in letter fit and line spacing. Asymmetric diacritics, especially
with asymmetric base letters, can cause problems for type designers, since they cannot simply or
symmetrically be aligned with the base character. Alignment is also affected by the angle of the
slope. Furthermore, there are multiple approaches to the vertical alignment of all diacritics. To
deal with these issues, the designer must be aware of how different diacritics affect the width of letters, the length of ascenders and height of letters. There can also be linguistic/cultural problems. The designer’s goals are harmony and balance.
Keywords:
diacritics, typeface design, typography
Slobodan Nedeljković, Uroš Nedeqkovć
THE WAY TOWARDS A NEW FORM OF BAROQUE CYRILLIC ALPHABET
Abstract:
The work covers the time and the emergence of the Civil Cyrillic, its unwilling acceptance by
Serbian Ortodox Church, Zaharije Orfelin’s reference books as well as Ivan Boldižar’s type faces
Obod and Orfelin which he derived from Zefarovic i Orfelin’s alphabets. The texts are the introductionof Professor Nedeljkovic’s typographical opus. Over the years he has felt the need for a complex typographical face throughout almost all type faces in classification. On this occasion we have prepared the new type face “Zaharijus” in the uppercase form - the variation of the subcategoryof slab serif (Claredon type).
Keywords:
-
Petra Balaban-Đurđev, Dragoljub Novaković
BEHAVIOUR OF PACKAGING FOILS IN THE PROCESS OF PRINTING, THE PRODUCTION OF PACKAGING AND PACKING
Abstract:
Beheviour of packaging foils is of the utmost importance in the process of printing, the production of packaging and packing. If the packaging foils lack the necessary characteristics, there may be temporary or permanent failure. In the context of the interaction of foils and the working parts of machinery, in this paper machinability is described and analyzed through the values of sliding properties, tensile strength and rigidity.
In order for the possible effect on machinability in further processes to be percieved, the results of
the research of the variations of sliding properties and tensile strength after the process of printing
have been considered.
Keywords:
machinability, sliding properties, tensile strength and rigidity of foils
Apro Magdolna, Dragoljub Novaković
EFFECT OF CREASING ON TENSILE STRENGTH OF PAPERBOARD
Abstract:
The folding paperboard box is one of the most prevailing form of sales packaging, its quality is
considered by professionals from graphic, packaging and paper industry. The tensile stregth, as
one of the fundamental properties of materials, can be an objective measure of creasing quality.
The paper gives a short overview of creasing process and its impact on quality of the packaging
unit, also it describes an experiment and showes its results.
Keywords:
creasing, tensile strength, crease quality
Brstina Sonja, Dragoljub Novaković
MODERN KONCEPT MODULAR DESIGN OF WOODEN PACKING
Abstract:
The main goal of this project is to present modern designing of wooden packing, based on modul
concept. Fundament of module concept is system of elements (modules) which compose wooden
packing. Design model is attributed with universality and dynamic data base. Data base is consisted of elements with universal etno art characteristics which are recognized as a nacional brend, together with proper product packed in this wooden packing.
Keywords:
wooden packing, package
Ristevski Blagojče, Dragoljub Novaković
DEVELOPMENT OF PROGRAM PACKAGE TO DESIGN WRAPPING FORMS
Abstract:
This work present software package, which show us the possible forms to produce wrapping, according to number of horizontal and vertical bending. There is a lot of idea during creating the
wrapping form. With using of this program you can get diferent solutions.
Keywords:
program, form, packaging
Dragana Krnjajić, Jelena Kiurski, Miljana Prica
APPLIANCE OF GREEN CHEMISTRY IN PRINTING
Abstract:
The paper is a review of using soy based printing inks and it is benchmark for implementation
of green chemistry in printing industry. Commercial printing process creates enormous amounts
of hazardous wastes (heavy metals used in coloring to petroleum-based solvents) and pollution.
Using soy oils reduces VOC emissions and creates a safer working environment for print shop
employees. They remain more stable throughout the printing process and they are made from renewable resource. Paper states the life cycle of soy based printing inks and their environmental
impacts through the use in lithographic sheet fed printing. It also represents the possibilities of
reducing waste through the use of soy-based inks instead of petroleum-based inks.
Keywords:
green chemistry, soy-based inks, lithographic sheet fed printing
Miljana Prica, Jelena Kiurski, Julija Fišl
EVALUATION OF PAPER MILL WASTE APPLIANCE IN METAL-CONTAMINATED SEDIMENT REMEDIATION
Abstract:
The goal of this work is to investigate the use of the paper mill sludge in the remediation of the
metal-contaminated sediments, in relation to the sludge chemical content and the contact time
between the sediments and paper mill sludge. Efficiency of this process is monitored using the
test that measures the concentration of metals which, during a certain time period (0,7,15 and 21
days), moved from an inmobile to mobile phase (so called “leaching” tests), where they could be
considered potentially dangerous and bioaccessible. The results obtained by leaching tests showed that addition of the paper mill sludge, consisting mainly of carbonates, silicates and organic matter, signficantly lowers the concentration of available metal form.
Keywords:
metals, sediment, paper mill waste.
Erzsébet Novotny
COLOUR MANAGEMENT IN PROOFING FOR STAMP PAPERS
Abstract:
New materials, design technologies and colour rendering requirements represent great challenges
for printing companies producing postage stamps. These are traditional products of Hungarian
State Printing Company too. Approval of stamp artwork before printing is implemented through
digital proofs nowadays. In case of stamp papers, the digital proof and the substrate of print differ
significantly from the point of luminescence. The proof is highly, while the print substrate is
lightly brightened optically, or for example the security stamp paper is optically not brightened at
all. This visual difference cause serious problem in contract proofing, in ICC profile making and
in the pressroom too. International practice in digital colour management generally suggests the
usage of UV emission filter for the colorimetry of resolution patterns. However, it is not known,
what level of colour modification is caused to the system by UV emission filters as regards stamp
papers. We were looking for an answer to this issue through our investigations.
Keywords:
digital proof, colour management, UV emission filter
Tanja Stipančević
QUALITY CONTROL OF POOF INSTALMENT OF FOGRA STANDARD IN PRINTING COMPANY ROTOGRAFIKA FROM SUBOTICA
Abstract:
This study has general assumptions needed for instalment of colour management system in printing company Rotografika from Subotica, and the measurements have been taken according to procedure by witch FOGRA has issued a certificate to Rotografika for proof, as a first phase in
realisation of complete colour management system.
Keywords:
FOGRA, Proof
Vera Marsenić
DIGITAL PROOF’S SPECIFIC AND COLOR MANAGEMENT
Abstract:
The most attractive components digital media technology are digital proofing systems. This paper
describes an explanation of color transformation methods for calibrating proof systems, and the
influence many parameters on the monitor adjustment in context of Colour Management System
Keywords:
digital proof, calibration, colour management
Dragoljub Novaković, Igor Karlović, Živko Pavlović, Čedomir Pešterac
THE POSSIBILITIES OF APPLICATION OF REFLEXION DENSITOMETERS IN CTP DEVICE CALIBRATION
Abstract:
During the exploatation of a CtP platessetter variations in the production conditions demands the
of repeatel of calibration of the device. In the paper are presented the possibilities of the application of reflection densitometers and CCD plate reader in the measurement of halftone values which are used as correction values for calibration. Integral optical density gained with the reflection densitometer was trasnformed in tone values with the Murray Davies and Yule Nielsen equations with different n correction factors. The measurements were done on three different CtP plates and the results of the measurements are presented. On the basis of measured results we can conclude that the application of the reflexion densitometers in the CtP platesetters calibration is possible with ensuring some necessary preconditions.
Keywords:
CtP offset plate ,tone value, n correction factor
Sandra Dedijer, Dragoljub Novaković, Igor Karlović, Živko Pavlović
ANALYSIS OF THERMAL CTP OFFSET PLATES AND PRINTS
Abstract:
CtP offset technology of platemaking nowdays takes the lead ower the conventional technology.
Dinamic changes and fast development, which are the main characteristic of XXI century, demand fast, uniform and price-friendly graphic products. CtP technology is exactly the one which comprehend these demands. In the GATF study “CtP Performance Study” in which several different CtP ofset plates were involved, the best results, in terms of analysed parametars, showed thermal offset plates. In this paper, analysis of two positiv thermal CtP offset plates-Presstek Anthem and Fuji LH-PIE and prints were made. Parametars which were monitored and analysed in terms of ISO 12647-2(1996) standard, are: dot gain on printing plate and print (for 40% and 80% fields), density (Dt), trapping and printing contrast (K80%).
Keywords:
printing plate, print
Ulrich Schmitt
OPTIMAL PICTURE QUALITY FOR PRINTING WITH CTP PLATES
Abstract:
-
Keywords:
optimal print quality in fades and vignettes for printing with ctp plates
Igor Karlović, Dragoljub Novaković, Marija Kovačević
COLORIMETRIC AND VISUAL ANALYSIS OF THE DIGITAL PRINTING REPRODUCTION
Abstract:
Digital printing similar to the other printing processes has its own variable factors which influence
the colour reproduction. While the other printing techniques have their appropriate ISO
standards which are stipulating the parameters and control values, this ISO standard doesn’t exist
for digital printing at this moment. In the paper the quality control of two different digital printing
systems was done, where values used for the quality control of other printing techniques as
optical density, tone value increase and colour gamut, as visual assessment of the paper surfaces
was measured and evaluated. The results have shown differences in the colour reproduction of the
different digital printing systems.
Keywords:
digital printing, quality control, colour reproduction
Živko Pavlović, Goran Savić
DESIGNING OF DIGITAL GRID_FTN PRINT CONTROL STRIP WITH OBJECT – ORIENTING PROGRAMMING LANGUAGE
Abstract:
In the field of graphic industry Ugra/FOGRA control strips have dominancein in quality control
in different processes of printing production. In this paper solution of digital GRID_FTN control
strip, which has been made in object – oriented programming language Java, has been presented.
Keywords:
control strip, PostScript, object - oriented programming language Java
Saša Ocokoljić
QUALITY FACTORS OF GRAPHICAL PRODUCT IN FLEXOGRAPHY
Abstract:
-
Keywords:
design, media, printing technology, flexography, prepress, printing forme, anilox, printing
ink, substrates, color management